狠狠色噜噜狠狠狠狠色综合久AV,国产高清AV大屁股免费看,久久丁香五月二区

Supporting wire mesh welding machine
Performance and characteristics: Motor power. The machine adopts synchronous control technology. The sub-control welding and welding time are controlled by the PLC digital programming system. The input panel is a touch screen or a button. The operation is more intelligent and rational. The characteristics of the secondary welding, the welding power of this machine is electric, using a stepping motor hopper, a brake motor driving the trolley let-off, and a stepping motor driving the trolley to pull the net. Both the warp and weft are straightened and cut by a straightening machine.

Features of special-shaped mesh welding machine model:

1. Advanced computer and "welding expert" program

The advanced microcomputer precision adjustment mode can be used to set the relevant parameters in the welding process. You can choose to discharge multiple times during the welding process, control the welding, single/multiple pulse or slow-up discharge to reduce the excessive welding current. The impact of welding sparks and splashes are reduced to a minimum.

2. Digital display and memory

Welding parameters are adjusted and adjusted with LED tube to display data and status, and stored in E digitally. The data in EPROM memory will not deviate and will be stored permanently.

3. Two-stage pneumatic operating system

Welding is pressurized with high and low pressures separately to prevent the welding head from suddenly falling down and crushing the workpiece. Then, higher pressure is applied for welding. This device allows the welding head to operate at a low pressure and lowers faster to increase efficiency. Minimize the impact on work.

4. Automatic compensation for power supply and frequency fluctuations

The built-in microcomputer scans the power grid and frequency changes, and automatically compensates and adjusts if there is voltage, unstable fluctuations or deviations in the power supply frequency.

5. Multi-cylinder configuration, according to the size of the mesh and the number of welding design electrodes and cylinders, each pair of electrodes is equipped with a separate cylinder.

Gantry Welding Machine

Gantry Welding MachineIt is named because of the appearance of the equipment, and it is the most common type of welding machine.

Zhongbang Welding Machine Factory has been engaged in the research and development and manufacturing of welding equipment since 2014. Automatic equipment such as welding mesh machines has been in a small position. Click to view related>>>>>Welding equipment